Blind and Visually Impaired Community
↑
3
↓
Getting into audio stuff. Focusrite Control? (self.Blind)
submitted by Laser_Lens_4
I'm looking into getting an audio interface for a microphone to upgrade my existing voice acting setup (I want something nicer than a USB mic) and also a hardware synth to start playing around with music (specifically a Reface CS). The research I've done so far into recording and composing with a sightless workflow is giving me the impression that I should be looking into hardware solutions as opposed to VSTs. My friend recommends Focusrite interfaces since they don't have screens. My only concern is the software: Focusrite Control. Is it accessible with NVDA/Narrator? Do I have to use it or can I do everything through hardware control? Thanks.
siwy4don 2 points 2y ago
You can set bit rate and sampling rate with nvda. Not sure what else do you need. I think the rest you set in DAW.
Laser_Lens_4 [OP] 1 points 2y ago
Perfect. Just order a 2i2 at Guitar Center. I figure the worst case is I have someone set it for me the first time round.
BlueRock956 2 points 2y ago
If you are looking for something inexpensive that will work, check out the Scarlet 2I2. Mine came with a condensor microphone and a headset.
siriuslylupin6 1 points 2y ago
I think we suggested the same preamp haha!
DrillInstructorJan 2 points 2y ago
You can get all kinds of USB interfaces that don't need software. If all you need is to plug one mic in almost anything will do. And yes, you're making the right choice to go with a separate interface and mic. I'd go to somewhere they have them and play around with it. In the end all you need is a level control. For voice acting you shouldn't really be playing around with advanced options anyway, they'll want a very straight unadulterated recording.
I record things into Audacity, which is pretty simple to use but all I'm doing is simple start stop stuff. If you need to get into editing there I think there's a group of blind people who use reaper but I have never needed it. You won't if you're just doing voice acting. I can't really comment on NVDA as I'm a Jaws person.
One thing that people really overlook is the setup of the room around you, so look up a guide on that. No matter what gear you have if you record in a very live room it'll sound terrible so make sure you have it covered.
I record things into Audacity, which is pretty simple to use but all I'm doing is simple start stop stuff. If you need to get into editing there I think there's a group of blind people who use reaper but I have never needed it. You won't if you're just doing voice acting. I can't really comment on NVDA as I'm a Jaws person.
One thing that people really overlook is the setup of the room around you, so look up a guide on that. No matter what gear you have if you record in a very live room it'll sound terrible so make sure you have it covered.
Laser_Lens_4 [OP] 1 points 2y ago
My primary uses for voice acting, but I also want to hook up that synthesizer which uses two unbalanced mono inputs. I also want to hook up studio monitors and headphones, so I’m going to need a number of connections. Honestly I should have done this the first time around, but I went the easy route and bought a yeti like a noob
DrillInstructorJan 2 points 2y ago
You can do most of that with a simple USB audio interface. You can easily get one that has inputs for microphone or line level sound, outputs you can use to drive speakers, and a headphone socket. You may need some bits and pieces of cables and such. Go to a music shop and get yourself kitted out.
Laser_Lens_4 [OP] 1 points 2y ago
Thanks for the input! No pun intended. I’ll see when I can get to guitar center. They will probably know a lot more.
napoleon88 2 points 2y ago
not accessible, sorry. I have an old focusrite gen 1, which doesn't require the control software.
siriuslylupin6 1 points 2y ago
XLR get a preamp I suggest the focus right solutions and I love the company heilsound they have great mics and sound. You will need to buy and xlr cable the preamp box will connect to your computer with usb.
This nonprofit website is run by volunteers.
Please contribute if you can. Thank you!
Our mission is to provide everyone with access to large-
scale community websites for the good of humanity.
Without ads, without tracking, without greed.
scale community websites for the good of humanity.
Without ads, without tracking, without greed.
©2023 HumbleCat Inc • HumbleCat is a 501(c)3 nonprofit based in Michigan, USA.